FAQs
To do so, use a tape measure to determine the room's length and width. Then multiply the length by the width to get your square footage. For instance, if the room is 12 feet wide and 12 feet long, you will need enough flooring for 144 square feet (12×12=144).
How do you measure a living room for flooring? ›
All you need to do is measure the length of the room, then the width, and multiply them together! For Example: Your room is 4 metres long and 8 metres wide. So the area of flooring you'll need is 32 metres squared!
How do I calculate how much flooring I need? ›
How do I calculate square feet for flooring?
- Measure the width of the room in feet.
- Similarly, measure the room's length in feet.
- Multiply these two dimensions to obtain the total square foot flooring: square foot flooring = width × length.
- That's it!
Multiply the length by the width and you'll have the square feet. Here's a basic formula you can follow: Length (in feet) x width (in feet) = area in sq. ft.
What is the best way to measure floor area? ›
Apply the Square Footage Formula
How to find square feet: multiply the length measurement in feet by the width measurement (in feet). This yields a product called the area, which is expressed in square feet (or square inches if you are calculating a much smaller space, such as a dollhouse).
How do I measure my living room size? ›
To calculate the square feet of a room, start by measuring the length and width of the room in feet using a tape measurer. Next, multiply the length by the width to calculate a room's total square footage. So if a bedroom is 12 feet wide and 12 feet long, it is 144 square feet total (12 x 12 = 144 sqft).
How to square a room for flooring? ›
Use a tape measure to measure the distance from one corner to the corner on the diagonal, and write down the measurement. Take the tape measure to repeat the process for the remaining two corners and write down the measurements. If the measurements are identical, you have a perfect square.
How do you calculate floor space? ›
Measure the length and width, in feet, of each room. Then, multiply the length by the width to calculate that room's square footage. For example: If a bedroom is 12 feet by 20 feet, it is 240 square feet (12 x 20 = 240).
How do you figure square yards for flooring? ›
Square yard calculations are required for estimating floor coverings, etc. To calculate square yards (SQYDS), multiply the length times the width, in feet and divide by 9. There are 9 square feet in a square yard.
What is the formula for floor area method? ›
Floor area ratio (FAR) is the measurement of a building's floor area in relation to the size of the lot/parcel that the building is located on. FAR is expressed as a decimal number, and is derived by dividing the total area of the building by the total area of the parcel (building area ÷ lot area).
In mathematics, the floor function (or greatest integer function) is the function that takes as input a real number x, and gives as output the greatest integer less than or equal to x, denoted ⌊x⌋ or floor(x).
How to calculate the area of a floor plan? ›
Simply split the room into as many rectangles as needed. Multiply the length and width of each rectangle to find the areas, then add them all together to find the total area.
How do you measure area for flooring? ›
Multiply the length of your room by the width
Multiply the length by the width of your room. To ensure there are no errors, use a calculator to do this. This is the size of your room in square meters.
How to calculate area? ›
How to calculate the area. To work out the area of a square or rectangle, multiply its height by its width. If the height and width are in cm, the area is shown in cm². If the height and width are in m, the area is shown in m².
How to calculate room area? ›
To calculate the area of a room, use the standard (Length) x (Width) = Area formula. Measure the maximum length and width at the widest points of the room. This is important and will help you get the correct measurements.
How much vinyl flooring do I need for a 12x12 room? ›
Vinyl Calculator by Room Size
| Room Size | Sq. ft. of Plank | Sq. Ft. of Sheet |
|---|
| 12×12 | 159 | 173 |
| 12×14 | 185 | 202 |
| 12×16 | 212 | 231 |
| 12×20 | 264 | 288 |
10 more rowsMeasure the length and width, in feet, of each room. Then, multiply the length by the width to calculate that room's square footage. For example: If a bedroom is 12 feet by 20 feet, it is 240 square feet (12 x 20 = 240). For each room, write the total square footage in the corresponding space on your sketch.
What is the app that measures a room for flooring? ›
MeasureSquare RoomScanner App (Free)
MeasureSquare RooScanner App can quick scan rooms to create a floor plan with accurate room measurement including doors, windows and cabinets with an iOS iPad/iPhone with a LiDAR camera.
How many packs of flooring do I need calculator? ›
To work out how many you need, divide the total surface area of your room (e.g. 100m2) by 15.07 and round up to the nearest half or full roll.
